V wire Johnson well Water Filter Pipe /wedge well water sand filter
Our johnson Water Filter Pipes are known for great strength, long service life and a very high level of adaptability for high-efficiency fluid-solid separation.
Our welded wire Water Filter Pipes use a sur-face wire which is v-shaped in profile, creating slots which enlarge inwardly. This means particles make only two-point contact in the slots and will not become lodged.
wedge wire water well Water Filter Pipe pipe consists of wedge-shape profile wire and the longitudinal support rods. each intersecting point of these wires is fusion welded.so water well Water Filter Pipe has sturdy constriction and good mechanical property.thewedge-shape section plane can avoid blockage,and make sure of the unimpeded water.the consecutive slot have more open area,and water well Water Filter Pipe can reduce the speed of the water entering to aviod the sand entering the Water Filter Pipe under the great pressure,so wedge wire water well Water Filter Pipe pipes can filter sand better.meanwhile ,the slot can change according to the real condition of the earth.
1. Johnson Water Filter Pipe information:
Johnson Water Filter Pipe consist of V-shape profile wire and the longitudinal support rods Each intersecting point of these wires is fusion welded
So Johnson Water Filter Pipe pipe has sturdy constriction and good mechanical property V-shape section plane can avoid blockage, and make sure of the unimpeded water Continuous slot have more open area, and it can reduce the speed of the water entering to avoid the sand entering the Water Filter Pipe under the great pressure, so water well Water Filter Pipe pipe can filter sand better
Meanwhile, the slot size can be changed according to the real condition of the earth
2.Material of this Johnson Water Filter Pipe:
Johnson Water Filter Pipe can be produced with SS 304, 304L, 316, 316L or carbon steel
Wire, slot, support of this Johnson Water Filter Pipe
Continuous slot wire-wrap Water Filter Pipe, Johnson water well Water Filter Pipe, wedge wire Water Filter Pipe, stainless steel water well Water Filter Pipe, we offer high-quality products with competitive price
|Johnson Screen Specification|
|Wedge Wire (mm):||2.2*3.0 , 2.3*3.0 , 2.3*3.5 , 3.5*5.0|
|Support Rod (mm):||Width : 2.30 3.00 3.30 3.70|
|Height : 2.70 3.60 4.70 5.60 6.30|
|Round : 2.50mm — 6.0mm|
|Slot Size||0.10 — 6.00mm ,also can be customized as your request.|
|Length||Max 6 meters.|
4” 6” 8” 10”
|Note: Other specifications can be customized according to your requirement.|
Other Water Filter Pipe types using round perforations or square openings plug easily leading to decreased efficiency and eventual Water Filter Pipe failure.
The benefits of our Water Filter Pipes are:Higher capacity,Reduced cost, since they have excep-tionally long wear life,Effective flow area is maximized resulting in lower pressure drop,Reduced maintenance requirements,Greater resistance to corrosive con-ditions and high temperatures and pressures,Greater resistance to stresses of installation and cleaning,Minimum risk of loss of media like catalyst or resin ,Easier accommodation of special site conditions.
Wire and rod information of Johnson Water Filter Pipe:
A wide range of wire and rod shapes make it possible to achieve the optimum balance of strength, open area, abrasion resistance and dewatering/separation efficiency
Johnson Water Filter Pipes round and strip support rods
Johnson Water Filter Pipes round rods are available in diameters ranging from 0.125-inch (3.175mm) to 0.500-inch (12.7mm)
Strip rods are available in widths from 0.070-inch (1.778mm) to 0.188-inch (4.775mm) and heights ranging from 0.375-inch (9.525mm) to 2.0-inch (50.8mm)
Johnson Water Filter Pipe Vee-wire profiles:
Johnson Water Filter Pipe Vee-wire profile wires range in widths from 0.020-inch (0.508mm) to 0.195-inch (4.953mm) and heights ranging from 0.040-inch (1.016mm) to 0.363-inch (9.220mm), other wire shapes also available
Common Johnson Water Filter Pipe shaped support rods:
Johnson Water Filter Pipes shape support rods range in width from 0.029-inch (0.737mm) to 0.151-inch (3.835mm) and the height ranging from 0.102-inch (2.591mm) to 0.120-inch (3.048mm)
We look forward to talking with you about the special strength, abrasion, corrosion resistance and other unique requirements of your application. We can design and build the perfect Water Filter Pipe to meet those needs.